The Visual Sound Dual Tap Delay gives you two separate channels which can be used independently or together, synchronized with a single tap-tempo switch. The two channels are identical, but with the second channel also having a Modulation control to add a Chorus effect to the repeats. Max delay time is one second for each channel.

Each channel can be used in either Manual or Tap modes, with controls for Manual Delay Time (in Manual mode), Repeats, Effect Level, and Tone, as well as Time Divisions for Tap mode.

There are also two internal switches. One switch controls whether Output 2 is effected or dry, while the other switch sets repeats to be either trailing or non-trailing for Channel 2 after the effect is turned off.

The Dual Tap Delay is designed to be used without the need to read a manual… a refreshing change from most modern delay pedals. The sounds from the hybrid analog/digital circuit are immediately gratifying, even on first use. What is a “hybrid analog/digital” delay? Basically, Visual Sound used custom programmed digital IC’s to produce functional delays with time divisions, but all the controls and related tone-shaping circuitry are analog. Most companies don’t do that because it costs more and is more complicated.

No Battery power- power supply only, which is not included. You may think thats a bit harsh, but the Visual Sounds guys think that most people have a multiple power supply setup or already possess a power supply that will do the job. Also it gets round the "different countries have different power outlet styles" .Our recommendation is the One spot power supply.

Current Draw: approx. 120mA (NOTE: PedalPower users – make sure to use one of the higher mA rated outputs, not the standard 100mA max outputs. Make sure to check your power supply owner’s manual for instructions and limitations… or just use a 1 SPOT.)